Concrete mixer is widely used in small and medium-sized projects such as foundation, cast-in-place pile, floor slab, pavement, yard, slope protection, ditch, river channel, bridge, culvert, tunnel, small and medium-sized reservoir, etc. In order to better use the equipment, users need to have a deep understanding of the company's product performance, quality, and service when purchasing the equipment, in order to avoid worries. Therefore, when accepting concrete mixing, users must meet the following conditions when debugging the equipment:

1、需調試設備各部件、附件及隨機東西應按標準裝備齊全。

1. All components, accessories, and random items of the equipment that need to be debugged should be fully equipped according to the standard.

2、備好液壓油和潤滑油脂，液壓油的油質應符合要求。

2. Prepare hydraulic oil and lubricating grease, and ensure that the oil quality meets the requirements.

3、按規定加注液壓油、燃油、潤滑油和冷卻水，且液壓油加至規定油面。

3. Fill hydraulic oil, fuel, lubricating oil, and cooling water according to regulations, and add hydraulic oil to the specified oil level.

4、應對混凝土泵進行檢查、調試和試運轉，使之進入正常作業狀況，液壓體系調試后應符合標準。

4. The concrete pump should be inspected, debugged, and tested to ensure it enters normal operating conditions. The hydraulic system should meet the standards after debugging.

5、調試用混凝土攪拌車管管路管徑為125。

5. The pipe diameter of concrete mixer truck for commissioning is 125.

6、設備應安放在平整堅實的地面上。用戶們除了對在購買產品時需嚴格檢驗以外，其實在日常保養問題上也是不可缺少的必要工作，這樣才能達到在操作過程中使用輕松且使用壽命更長的理想效果。

6. The equipment should be placed on a flat and solid ground. In addition to strict inspection when purchasing products, users are also indispensable and necessary in daily maintenance issues, in order to achieve the ideal effect of easy use and longer service life during the operation process.