水泥自動攪拌車專用裝置的重要組成部分，是原動機和工作機之間的獨立的閉式傳動裝置。在長時間的工作過程中，攪拌車減速機難免會出現一些故障或損壞，接下來簡單了解一下。

An important part of the special device for automatic cement mixer is an independent closed transmission device between the prime mover and the working machine. In the long working process, the mixer reducer will inevitably have some failures or damages. Now let's have a brief understanding.

1，部分滾動體承載過大。減速機在工作中，若軸承調心角度達到限，會造成個別軸承滾動體承載急劇變大，導致滾動體與內、外圈相接觸的位置發生塑性變形，甚至引起內、外圈斷裂。

1. Some rolling elements bear too much load. During the operation of the reducer, if the bearing alignment angle reaches the limit, the load of individual bearing rollers will increase sharply, resulting in plastic deformation at the contact position between the rollers and the inner and outer rings, and even causing the inner and outer rings to fracture.

2，軸承定位失效。減速機在工作中，若軸承鎖緊螺母在軸向沖擊載荷作用下產生松脫，失去鎖緊作用，將造成軸承承載狀況惡化，導致軸承磨損加劇甚至損壞。

2. Bearing positioning failure. During the operation of the reducer, if the bearing locknut loosens under the axial impact load and loses its locking effect, the bearing load condition will deteriorate, resulting in increased wear and even damage of the bearing.

3，軸承滾動面有異物。若減速機內部混入雜質，將導致軸承磨損加快，甚至損壞。

3. There are foreign matters on the rolling surface of the bearing. If impurities are mixed in the reducer, the bearing will be worn faster, or even damaged.

4，后操縱手柄重

4. Weight of rear joystick

①拉桿支架缺黃油；

① The pull rod bracket is short of grease;

②連接球頭有無松動。

② Check whether the connecting ball joint is loose.

5，室內控制器手柄操作重

5. Heavy operation of indoor controller handle

①檢查室內控制器拉線是否卡死，角度是否過大；

① Check whether the cable of indoor controller is stuck and the angle is too large;

②檢查拉線包皮有無磨損；

② Check whether the cable sheath is worn;

③檢查限位螺母是否松動。

③ Check whether the stop nut is loose.

水泥自動攪拌車損壞部位的原因分析就到這里了，您對此有什么分享的內容就來我們網站http://m.top2010.cn咨詢吧！

That's all for the cause analysis of the damaged parts of the automatic cement mixer. If you have anything to share, please come to our website http://m.top2010.cn Consult!