（一）攪拌筒
（1） Mixing drum
1. 日常檢查攪拌筒拖輪，有無破損、松動及不正常聲音。每月加一次潤滑脂。
1. Daily check the mixing drum tugboat for damage, looseness and abnormal sound. Add grease once a month.
2. 日常檢查攪拌筒滾道，有無磨損、損傷及焊縫開裂。適時加涂潤滑脂，涂一薄層。
2. Daily check the mixing drum raceway for wear, damage and weld cracking. Timely add grease and apply a thin layer.
3. 攪拌筒內部經常性沖洗，鏟刮粘著的混凝土。
3. The internal part of mixing drum shall be washed regularly and the adhered concrete shall be scraped.
（二）混凝土攪拌罐車驅動系統
（2） Driving system of concrete mixing tank truck
1. 日常檢查減速機有無漏油，油量是否足夠，油內是否有雜質。初次換油時間為500工作小時，以后每2000工作小時或一年換一次油。
1. Daily check whether the reducer has oil leakage, whether the oil quantity is enough and whether there are impurities in the oil. The first oil change time is 500 working hours, and then every 2000 working hours or once a year.
2. 每三個月檢查傳動軸法蘭螺栓有無松動，十字軸萬向節有無松動，每月加注一次潤滑脂。
2. Check whether the flange bolt of transmission shaft is loose and whether the universal joint of cross shaft is loose every three months, and add grease once a month.
（三）混凝土攪拌罐車操縱系統
（3） Control system of concrete mixing tank truck
操縱是否正常、靈活，每月加注一次潤滑脂，相對運動表面加涂潤滑脂。
Whether the operation is normal and flexible, add grease once a month, and apply grease relative to the moving surface.
（四）混凝土攪拌罐車液壓系統
（4） Hydraulic system of concrete mixing tank truck
1. 每六個月檢查油箱、加油口，有無污垢、漏油、油量是否足夠，清洗、修整、加油，補油或換油時必須經過過濾裝置過濾。
1. Check the oil tank and oil filler every six months to see if there is dirt, oil leakage, and whether the oil quantity is enough. When cleaning, repairing, refueling, adding oil or changing oil, it must be filtered by filter device.
2. 日常檢查油泵、馬達、各類閥及其接頭，有無漏油、損傷。擰緊或更換油標。
2. Daily check the oil pump, motor, various valves and their joints for oil leakage and damage. Tighten or replace the oil indicator.
（五）混凝土攪拌罐車供水系統
（5） Water supply system of concrete mixing tank truck
1. 日常檢查水管、接頭有無漏水，收緊管箍或更換。
1. Check the water pipe and joint for water leakage, tighten the pipe hoop or replace it.
2. 日常檢查閥門是否轉動靈活，修整或更換。
2. Daily check whether the valve can rotate flexibly, repair or replace.
The above content is the content of today introduced by China Science and technology mixer. For more information, please pay attention to the website: http://m.top2010.cn We will regularly update new knowledge and content for you to present
上一篇：中科攪拌車選擇哪一款比較好？
下一篇：自動上料攪拌機零件磨損需要怎么處理？
