制動盤是盤式制動器的摩擦偶件，除應具有作為構件所需要的強度和剛度外，還應有盡可能高而穩定的摩擦系數，以及適當的耐磨性、耐熱性、散熱性和熱容量等。下面來講講制動盤容易出現的問題有什么。
The brake disc is the friction coupling part of the disc brake. In addition to the strength and stiffness required as a component, it should also have a high and stable friction coefficient as much as possible, as well as appropriate wear resistance, heat resistance, heat dissipation and heat capacity. Now let's talk about the problems that are easy to occur with the brake disc.
自動攪拌車的制動摩擦片部位受損，就會使金屬襯片因受到摩擦而出現收回尖叫聲并且會伴隨著過熱現象，這時我們就應該更換制動摩擦片了。
If the brake friction lining of the automatic mixer is damaged, the metal lining will retract and squeal due to friction, accompanied by overheating. At this time, we should replace the brake friction lining.
制動鉗部位有一個起固定作用的螺栓，該螺旋出現松動后就會導致制動鉗部位出現歪斜的現象，這時零件和制動盤就互相干預，這樣也會導致出現異響。
There is a bolt for fixing the brake caliper. If the screw is loose, the brake caliper will be skewed. At this time, the parts and the brake disc will interfere with each other, which will also cause abnormal noise.
低壓膠管部位出現了老化、磨損的現象，油管接頭處有所松動或該部位的密封件出現了損壞等，以上情況都是造成制動液外滲漏的原因，這時我們需要對其相關部位進行檢查，把接頭上緊或者更換橡膠管、密封件等部位。
The aging and abrasion of the low-pressure rubber pipe, the looseness of the oil pipe joint or the damage of the sealing element at this part are all the reasons for the leakage of the brake fluid. At this time, we need to check the relevant parts, tighten the joint or replace the rubber pipe, sealing element and other parts.
制動鉗的活塞處有一個密封圈，若該密封圈出現了磨損的情況，就會導致制動液外漏，這時我們需要更換該密封圈和防塵圈。
There is a seal ring at the piston of the brake caliper. If the seal ring is worn, the brake fluid will leak out. At this time, we need to replace the seal ring and dust ring.
The above are the problems that are easy to occur with the brake disc of the automatic mixer. After you understand the relevant problems, you should make preparations for prevention. Please come to our website for more attention http://m.top2010.cn Consult!
上一篇：水泥自動攪拌車各種方向的保養包含什么？
下一篇：水泥自上料攪拌車滑動軸承損壞如何處理
